12 volt DC charge SYSTEMS electric boat ~ Home made Flexible SOLAR PANELS ~ solartekTV

12 volt DC charge SYSTEMS electric boat ~ Home made Flexible SOLAR PANELS ~ solartekTV


Alright. We’re gonna go ahead and mount… this 5 WATT panel… that we, fisnished making here a little
while ago and uh… this one runs at about twentytwo ta twenty four Volts,… DC (direct current) and it’s actually going to a charge
controller uhh, It’ll max out @ 14.2 volts,DC and, we’re gonna go ahead and mount it here on the 1060 Surge right on the inside gunnel… (aka) or the rub rail… try to center it up a bit use number 6 screws…gonna start right here in the middle.. 1/2′ (length) screw, # 6… cinch it up… don’t make it to tight.. looking pretty nice… remember, your just cinching it up there
lets take a look here…oh yeh… gonna use a slightly larger ( screw) head here.. and… rememeber , jst cinching it up there, doesn’t have to be to tight… alright well… that one’s installed! looks pretty good! just gotta wire it in… actually, we’re gonna wire it in at the two solar panels
that we’ve already got installed wire it in parallel… this will add about a quarter amp of current I’d say about…point 2 … @ the most..(amps of current) Once again, we will be putting one here on the PORT side, we’ll also have a little bit larger panel here on the AFT seating area… Alright! Well, lets go ahead and wire it in!!

Leave a Reply

Your email address will not be published. Required fields are marked *