Brilliant Kid Shows How to reverse a shaded pole motor

Brilliant Kid Shows How to reverse a shaded pole motor


in this video I will show you how to reverse
a shaded pole motor. as you can see right now it spins clockwise. The first thing we
want to do is remove the two screws that hold the bearing assembly in place. one you’ve
finished removing the two screws, remove the bearing assembly off, the rotor assembly off
too. but you may want to take the tape off the shaft first! so here’s what comes out,
then, we have to lift the frame off of the bottom bearing assembly, and then flip the
frame around, and line up the two holes, with the screw holes on the bearing assembly. replace
the rotor into the bottom bearing assembly, then replace the top bearing. and put the
two screws into the bearing assembly. do not over-tighten the screws. after you are finished
tightening the screws, make the rotor spins freely. the rotor does not spin freely so
we’ve obviously over-tightened something. now that the rotor spins freely, we can go
ahead and test it out. as you can see, it now spins counter clockwise. that’s a video
on how to reverse a shaded pole motor. thank you very much for watching, please like if
you found this helpful, and comment. goodbye. don’t forget to subscribe as well!

5 thoughts on “Brilliant Kid Shows How to reverse a shaded pole motor

Leave a Reply

Your email address will not be published. Required fields are marked *